DANA STEEL PROCESSING INDUSTRY LLC-->
Profiles & Cladding Division
[http://www.danagroups.com/products/profiles-and-cladding/]
EMAIL :- INFO@DANAGROUPS.COM / INFO@DANASTEEL.COM






DOWNLOAD COMPLETE DANA PROFILES & CLADDING PRODUCT DATA SHEETS [PDF]
CALL NOW - 00971-50-7983153/00971-4-2217273

DOWNLOAD COMPLETE PRODUCT CATALOGUE[PDF]
CALL FOR INQUIRIES :- 00971-50-7983153/00971-4-2217273
Email :- info@danasteel.com / drdana@eim.ae
DANA SANDWICH PANELS

DANA SINGLE SKIN TRAPEZOIDAL PROFILE SHEETS

  • Aluminium(Al): - Mill finish or Prepainted in thickness range of 0.40mm - 2.00 mm
  • Galvanized(GI):- Mill finish or Prepainted in thickness range of 0.30mm - 0.90mm
  • Galvalume/Aluzinc(AZ):- Mill finish or Prepainted in thickness range of 0.30mm - 0.90mm

  • The various profiles available with DANA are as below :-->
  • DANA DSS 35/200
    single skin profile sheets supplier roof wall,dss 35/200,DANA uae
  • DANA DSS 45/250
    sandwich panel gi corrugated roofing sheet trapezoidal,dss 45/250,DANA uae
  • DANA DSS 45/150
    single skin sheet profile uae,45/150,DANA uae
  • DANA DTP 42/205(tile profile)
    tile clay profile steel aluminium dana steel,42/205,DANA uae
  • DANA DSS 76/18(sinusoidal wave profile)
    wave profile sinusoidal corrugated,76/18,DANA uae


  • DANA INSULATED SANDWICH PANELS

  • Corrugated Cladding sheet: - ( PPGI/PPGL/PPAL) or ( MFGI,MFGL,MFAL) -- Pre-painted(PP) or Mill finish(MF) in Aluminum, Alu-zinc and GI steel
  • Bottom Liner sheet: - ( PPGI/PPGL/PPAL) or ( MFGI,MFGL,MFAL) -- Pre-painted or mill finish in Aluminum, Alu-zinc and GI steel or aluminum foil backed craft paper
  • Insulation Material:-PUF Polyurethane foam (B2|B3) ,Polyisocyanurate(PIR),Rock wool/Mineral Wool in Thicknesses 40mm,50 mm,75mm,100mm,125mm and 150 mm.


  • DANA supplies sandwich panels & it's accessories based on the client's chosen parameters such as weight, strength, durability, surface finish, colour and thermal insulation properties.Our Experienced engineers take into mind the K & U values,Fire class,Structural Load bearing capabilities while recommending the right choice for the job.

    DANA SANDWICH PANEL DCP 35 / 200

    sandwich panel manufacturer,35/200,DANA uae

    Specification :-
  • Aluminium profiled sheet is 0.40 mm. up to 0.90 mm. thick Alloy A3105 - H16 Temper is supplied as standard.However different Alloys like ( 3003,3013,4343,4045, 5052,5086,6061, 8011 etc) & Tempers (H12,H14,H16,H18,H20,H22,H24,H32,H34,H36,H38 etc)can be supplied on request.
  • Galvanized (GI) & Alu Zinc(AZ) coated steel profile sheets 0.40 to 0.90 mm thick as per ASTM A 653 for GI & ASTM A 792 for Alu Zinc - Alternative grades Can be supplied on client request
  • The Surface is painted with baked regular modified enamel polyester(RMP), with 5 micron primer and 20 micron coat on the weathering side and 5/7 micron primer on the reverse - PVDF, Silicon, Modified Polyester, Platisol & special coatings are available on client request.
  • DANA SANDWICH PANEL DCP 45 / 250

    puf insulatedsandwich panel,45/250,DANA uae oman bahrain saudi

    Specification :-
  • Aluminium profiled sheet is 0.40 mm. up to 0.90 mm. thick Alloy A3105 - H16 Temper is supplied as standard.However different Alloys like ( 3003,3013,4343,4045, 5052,5086,6061, 8011 etc) & Tempers (H12,H14,H16,H18,H20,H22,H24,H32,H34,H36,H38 etc)can be supplied on request.
  • Galvanized (GI) & Alu Zinc(AZ) coated steel profile sheets 0.40 to 0.90 mm thick as per ASTM A 653 for GI & ASTM A 792 for Alu Zinc - Alternative grades Can be supplied on client request
  • The Surface is painted with baked regular modified enamel polyester(RMP), with 5 micron primer and 20 micron coat on the weathering side and 5/7 micron primer on the reverse - PVDF, Silicon, Modified Polyester, Platisol & special coatings are available on client request.
  • SECONDARY STEEL MEMBERS - COLD FORMED "Z" & "C" PURLINS

    DANA Z & C purlins are designed as secondary beam supports for roofing and cladding sheets, insulated panels and liner trays, for spans up to 10.0m. These purlins can be joined employing the overlap or sleeved system.We have a fully automatic production line for making holes/slots as per customer's drawings.We can manufacture Z purlins upto a maximum height to 302mm and C purlins up to a maximum height of 450mm. The metal thickness varies from 1.5mm to 3.0 mm. Sleeves are used to join purlin above frames, where as 6 to 8 mm cleats and 16mm bolts are usually used to connect this profile to building frames.

    The section reference code of a Z-Section 202mm deep and 2.5mm thick=202 Z25. The first three digits of section reference indicate the depth of the section in millimeters (ie: 202 equals 202mm depth). The fourth digit is a letter that signifies the profile type(i.e: Z for Z profile & C for C profile). The last two digits indicate the material thickness ( i.e: 25 equals 2.5mm).
  • Specification :-
  • ASTM A653 Grade 50/80 G90 (New ASTM Standard, Min Yield Strength 340Mpa for Grade 50,and 550 Mpa for Grade 80)
  • ASTM A446 Grade 'D' G90 (Old ASTM Standard, Min Yield Strength 340Mpa)
  • EN 10147 S350GD Z275 MAC
  • DANA COMPOSITE FLOOR DECKING SYSTEM -[DSD 45/150 & DSD 75/305]

    The DANA composite floor decking sheets ( DSD 75/305 & DSD 45/150) offers the ultimate in lightweight steel decking for all multi-rise buildings including car parks,hangars. It combines exceptional spanning capabilities with reduced concrete usage to provide a cost-effective and attractive floor solution that s easy to install.
    gi composite decking sheet dana 45-150 uae


    The state-of-the-art profile has been developed using roll-forming techniques pioneered by DANA Steel, drawing on our years of experience in designing advanced composite floor decking systems.
    gi composite decking sheet dana 75-305 uae


    Engineered with optional closed ends, DANA DSD 75/305 & DSD 45/150 decking sheet profile provides excellent acoustic performance and fire protection, with no requirement for filler blocks.
    Its profile has been specially designed with trough stiffeners and side laps positioned to guarantee centrally placed shear studs.The covering width is 914mm for DSD 75/305 & 900mm for DSD 45/150, creating lightweight sheets that are easy to handle delivering significant on-site safety benefits.

    Grade 50,Grade 80,Decking sheets uae manufacturer


    DANA Composite decking sheets[DSD 75/305 & DSD 45/150] are available in Galvanized/Galvalume Steel /Prepainted Galvanized Steel,Grade 50[Min 340 Mpa] & Grade 80 steel[Min 550 Mpa].
  • Long-span capability
  • Optimised profile design gives exceptional unpropped spanning capability of up to 5.5 metres, reducing structural steel requirements and hence cost.
  • Reduced concrete usage
  • DANA decking profile requires a reduced concrete volume for any slab depth, providing a more sustainable solution and reducing costs.
  • Enhanced shear-stud interaction
  • Profile design guarantees central shear-stud positioning to optimise composite action, reducing the need for on-site checking.
  • Excellent acoustic and fire performance
  • Manufactured with closed ends to give exceptional fire protection and acoustic performance,while simplifying installation.

    Note :- ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE

    SEND YOUR INQUIRIES TO :- INFO@DANAGROUPS.COM / INFO@DANASTEEL.COM
    CALL NOW FOR ATTRACTIVE PRICES :- 00971-50-7983153( Mr Ankur) / 00971-4-2217273
    Products:- Water Heaters | Water Coolers & Chillers | Cable Management systems | Iron & steel