DANA STEEL PROCESSING INDUSTRY LLC | FALA DANA STEEL INDUSTRY LLC ERW pipes Manufacturing Division
DANA STEEL PROCESSING INDUSTRY LLC AND FALA DANA STEEL INDUSTRY LLC , are part of international conglomerate DANA GROUP[www.danagroups.com].It is an ISO 9001:2008 certified organization, engaged in manufacturing & exporting of quality ERW Black and Galvanized Steel Pipes & Tubes & Pre Galvanized Tubes ,with it's state-of-the-art manufacturing facilities located in a sprawling 20,000 square meters industrial complex in Jebel Ali Industrial Area(Dubai) and Al Jurf Industrial (Ajman)
"DANA" offers pipes & tubes from 15 mm NB to 150 mm NB following IS:1239 (Part-1) 2004 [Equivalent to BS:1387//Equivalent to EN:10255], IS:1161 - 1998 [Equivalent to BS:1139//Equivalent to BS EN:39], IS:4270-2001(Part-5) [Equivalent to BS:879], IS:9537 (Part-ll) 1981 [Equivalent to BS:4568//Equivalent to BS EN 50086-1:1994],IS:3589-2001, IS:3601-2006(Part-4) [Equivalent to BS:6323],IS : 9295-1983 specifications. In addition to these it also manufactures rectangular & square steel hollow sections as per IS:4923:1997.
Pipes ERW Electric Resistance Welded
These are made using strips of hot rolled or cold rolled steel. These flat strips are progressively rolled until the edges meet and then welded at the join.
Pipes and Tubes made by this method have a large number of applications in general steel fabrication and general engineering applications, light construction and furniture.
Both RHS and SHS hollow sections are made using the electrical resistance welding method which is same as that outlined above for the ERW pipes. Sizes produced in SHS (Square Hollow Sections)are 20mm x 20mm,25mm x 25mm,30mm x 30mm,40mm x 40mm,50mm x 50mm in thickness range of 0.90mm - 3.0mm. Sizes produced in RHS ( Rectangular Hollow Sections) are 20mm x 40mm,30mm x 60mm,40mm x 80mm,50mm x 100mm in thickness range of 0.90mm - 3.0mm