Factory :- #5325494, Saih Shuaib 3,Dubai Industrial City,Dubai,UAE
0097142217273

GALVANIZED STEEL (GI)

Hot Dip Galvanized Steel Coil is produced by passing Cold Rolled Steel Coil through a Molten bath of Zinc at temperatures of around 460 degrees Celsius.The Zinc coating on the steel coil substrate acts as a barrier between the atmosphere and the surface of the metal. Further due to it’s lower chemical potential as compared to Iron(Fe),it is attacked and dissolved first,thereby offering superior corrosion resistance(cathodic protection).

Continuous Galvanizing Line - Hot Dip Galvanized Steel Coil
Process Flow of DANA STEEL CGL-1(Continuous Galvanizing Line)

The annual capacity of our Continuous Galvanizing Line(CGL) is 250,000 tons. We adopt the Vertical Non-Ox technology for our hot dip galvanizing process which is the most advanced and wildly used in the world. The size range of our production is 0.12~3.80mm X 650-1350mm.

Hot Dip Galvanized Coils Manufacturer & Supplier - DANA STEEL Dubai UAE
Hot Dip Galvanized Coil Manufactured by DANA STEEL DUBAI in Standard Domestic Packing.

DANA STEEL‘s hot dipped galvanized steel coils are used in multiple applications and by many types of industries, including the automotive, construction, and appliance manufacturing where rust-resistance is of utmost importance to the customer. Because non-corrosive hot dipped galvanized steel coils are less costly than stainless steel, many industries rely on their reliable use and more affordable cost. A strongly bonded zinc coating is among the most effective and economical methods for protecting bare steel from corrosion. DANA STEEL‘s galvanized steel coils can be found in a multitude of products that range from washing machines, refrigerators, flashing, duct-work, car parts, drum containers, decking, HVAC systems, and much more. Our hot dipped galvanized steel products are used in applications designed for the residential, commercial, and industrial sectors.

Steel Coils Factory for GI & PPGI Steel in Dubai UAE - DANA Steel

Hot Dip Galvanized Steel Coils are further Classified and designated on the basis of various quality parameters.DANA STEEL produces hot dipped galvanized steel coil in a wide range of sizes. Specific size ranges are associated with product applications. We can produce thickness to meet our customers’ needs between 0.18 mm to 3.80 mm and a width from 650 mm to 1350 mm. These ranges provide customers with use options for all known applications of galvanized steel coils. As a leading galvanized steel coil manufacturer, DANA STEEL adheres to strict quality standards to produce our galvanized steel coils/sheets. We guarantee our products meet and exceed our client requirements.

All our GI & PPGI Steel Coils are Protected by Specially Formulated VCI(Volatile Corrosion Inhibitor) Coated Paper which Prevents from Rust & Corrosion for Extended Periods

The Zinc Coating Mass Range of DANA STEEL is between 40 gsm – 360 gsm(grams per square meter of sheet metal).The Surface Finish & Visual Appearance of the Zinc coating of Gi Coils can be :-

Regular Spangle
Minimized or Minimal Spangle
Zero Spangle (Extra Smooth)

regular spangle bright and shiny surface manufactured gi coils sheets by DANA STEEL
Regular Spangle Surface Finish Produced by DANA STEEL Dubai
Regular Spangle,Chromated & Un-oiled Coils – DANA STEEL

We invite our worldwide customers to contact us so we can help them select the best hot dipped galvanized steel coils to suit their needs.We manufacture Continuously Hot Dip Galvanized(GI) Coils as per the below Standards

ASTM A653/A653M
This is the American standard for cold rolled hot dip galvanized steel materials.

JIS G 3302
This is the Japanese material standard associated with hot dipped galvanized steel coils.

BS EN 10346:2009 which Supersedes BS EN 10327:2004  & BS EN 10326:2004
This is the European material standard for Continuously hot-dip coated steel flat products.

 

Classification and Designation Requirements of Continuously Coated Galvanized (GI) Steel Coils
Coating finish
Surface treatment (surface protection)
Stretcher strains
Adhesion of coating
Tolerances on dimensions and shape
Testing (units, numbers, sampling, methods and retests)
Storage and transportation
Chemical composition
Mechanical properties
Surface quality
Freedom from coil breaks
Coating mass
Surface condition
Suitability for further processing
Marking and packing

Standard Export Sea Worthy Packing by DANA STEEL

Our Products are PROUDLY “MADE IN UAE” and are Exported Globally to more than 50 countries Including United States of America(Ports of New York & New Jersey,Port of Savannah,Virginia,Charleston,Los Angeles,Houston,Long Beach,Seattle-Tacoma,Georgia etc)Central America(Brazil,Argentina,Peru,Chile,Ecuador,Colombia,Uruguay,Paraguay,Guatemala etc),EuropeanUnion(EU), Saudi Arabia(Dammam,Jeddah,Riyadh,Dahran,Jubail,Yanbu), Kuwait,Bahrain(Manama),Oman(Muscat,Sohar,Seeb), Nigeria, Kenya, Uganda, Mauritius, Africa, Morocco, Algeria, Jordan, Burundi, Comoros, Djibouti, Ethiopia, Kenya, Madagascar,  Mauritius, Rwanda, Seychelles, Somalia, Tanzania and Uganda. Besides the above,we also have a strong marker presence in the West African Region:: Sierra Leone/Gambia/Senegal/Ghana/Mauritania/Chad/Liberia/Sao Tome and the South African Region :: South Africa/Mozambique/Malawi/Zimbabwe/Zambia/Angola.