DANA STEEL is the leading manufacturer & exporter of high quality Hot Dip Galvanized Steel Coils & Sheets ( GI Coils & Sheets) as per International Standards & Specifications.
Below is the Chart of our Continuous Galvanizing Line – CGL#1’s Process Capabilities,which shows the thickness,width,weight ranges and different finishes of Galvanized Coils,Sheets & Slits which are manufactured in our factory in Dubai UAE.
Process Capability (Line Specification) | |||
Description | Galvanizing | Cut to length | Slitting Line |
Type | VERTICAL NOF CONTINUOUS GALVANIZING | ||
Line Speed | 120 mpm | 100 mpm | 100 mpm |
Thickness (MM) | 0.12 TO 3.80 MM | 0.12 TO 6.00 MM | 0.18 TO 3.80 MM |
Width (MM) | 650 TO 1350 MM | 350 TO 2000 MM | 35 TO 1550 MM |
Output Coil ID (MM) | 508mm / 610mm | – | 508mm / 610mm |
Output Coil OD (MM) | 1850 mm MAX | – | 1850 mm MAX |
Output Coil Weight (MT) | 15 MT MAX | – | 10 MT MAX |
Zinc Coating (GSM) | 40 TO 360 (GSM) | 40 TO 360 (GSM) | 40 TO 360 (GSM) |
Length (MM) | 500 TO 4000 mm max |

DANA Steel Galvanized Coil Loaded for Domestic Road Delivery in UAE
Product Type & Applicable Specifications of Galvanized(GI) Steel Coils & Sheets
Description | GALVANIZED STEEL |
Specification | ASTM A 653/A 653M – 18 |
CS Type A,B,C | |
FS Type A,B | |
DDS Type A,B | |
SS Grade 33, 37,40, 50,55,80 | |
EN 10346 :2015 which supersedes EN 10327 : 2004 | |
DX51D, DX52D , DX53D | |
EN 10346 :2015 which supersedes EN 10326 : 2004 | |
S220GD, S250GD, S280GD,S320GD, S350GD, S550GD | |
JIS G 3302 -2010 | |
SGCC, SGCD1, SGCD2, SGC – 340, 400, 440, 490, 570 | |
Type | Tension Levelled / Non Tension Levelled |
Skin Passed / Non Skin Passed | |
Surface Finish | Regular Spangle/ Minimized Spangle /Suppressed Spangle |
SURFACE TREATMENT | Chromate Passivated (Cr+6 / Cr+3), Non-Chromate Passivated, Oiled, Non Oiled, Anti-Finger Print and No Treatment. |

Regular Spangle,Chromated & Unoiled Bright Finish Galvanized Steel Coil
Comparable International Standards of Galvanized Coils & Sheets
CLASSIFICATION | ASTM A 653 -2018 | EN 10346 -2015 | JIS G 3302 -2010 |
COMMERCIAL QUALITY | CS | DX51D | SGCC,SGCH |
LOCK FORMING QUALITY | CS | DX51D | SGCD1 |
DRAWING QUALITY | FS | DX52D | SGCD2 |
DEEP DRAWING QUALITY | DDS / EDDS | DX53D | SGCD3 |
STRUCTURAL QUALITY | GRADE 230-550 |
S220-S550 |
SGC 340-570
|
Galvanized Coils – Container Stuffing @ DANA STEEL